SELECTION MECHANISM AND CAMMING DESIGN.
THE SELECTION OF THE CYLINDER NEEDLES IS EFFECTED INDIVIDUALLY BY MEANS OF MANUALLY SELECTABLE PATTERN LEVERS AT EACH FEEDER. DEPENDENT OF THE RESPECTIVE POSITION OF THE LEVER. THE BUTTS OF THE PATTERN JACKS ARE PRESSED INTO THE JACK CYLINDER AT AN EARLIER (MISS) OR LATER (TUCK) POINT IN TIME.
EACH SELECTION MECHANISM HAS 39 PATTERN LEVERS.

POSITIONEED ONE ABOVE THE OTHER. 36 LEVERS ARE USED IN CONJUNCTION WITH DIAGONAL JACK SET-OUTS. 37 LEVERS IN CONJUNCTION WITH CHEVRON JACK SET-OUTS FOR MIRROR REPEAT DESIRNS.
 
DIAL COMMING WITH 2 NEEDLE TRACKS FOR WHICH EXCHANGE CAMS KNIT, TUCK, MISS, SUPPORT.

SELEETION MECHANISM IN 3-WAY TECHNOLOGY AT EACH FEEDER FOR AN UNLIMITED VARIETY OF PATTERNS.

PATTERN WIDTH OF THE SELECTION UNIT, 36 STITCHES WITH DIAGONAL JACK SET-OUT 72 STITCHES WITH CHEVRON JACK SET-OUT FOR MIRROR REPEAT DESIGNS.

HIGH EFFICIENCY DUE TO REDUCED RESETTING TIME FOR PATTERN CHANGES INVOLVING ONLY ROW OF LEVERS.

PATTERN CHANGES DO NOT PRODUCE ANY ADDITTIONAL COSTS.
 
  
EQUIPMENT
SIDE CREEL WITH RESERVE BOBBIN PINS.
POSITVE MPF 40K1F/24V FEEDING.
NEEDLE LUBRICATION BY AUTOMATIC SPRAY OIL (TAIWAN BRAND) .
DIAL EXCHANGE CAMS FOR 2 NEEDLE TRACKS FOR POSITIONS KNIT AND MISS.
FEEDERS IN A COMMON RING FOR EASY ADJUSTMENT, EACH FEEDER HAVING TWO YARN GUIDE HOLES.
FREQUENCY CONTROLLED DRIVE (AC).
120-SECTION CLOTH WINDER OF ROUND WEAVING MACHINE.