等导纱角锭翼
时间:2007年01月18日
|
联系人:郁建峰、沈国荣 |
电话:0510-83801370 |
传真:0510-83801370 |
地址:江苏省无锡市锡山区八士镇 |
邮编:214192 |
邮箱:postmaster@fdfjpj.com |
网址:#Null |
粗纱机上由前后排高低锭杆构成等导纱角纺纱,可使前后排粗纱的无捻三有区相同,从而减少前后排粗纱的伸长率差异和粗纱结构差异,对三罗拉牵伸效果更显著。
During the spinning the equal guide angle composed of both front and back row spindle blades can make the non-twisting angle zone equal for the front and back roving. Therefore the elongation and structure differences between the front and back row roving can be reduced,and it is more effective for three-roller drafting.
粗纱卷装尺寸 Dimension of roving:Ø150×400、Ø135×400、Ø130×400、Ø130×320
最高转速 Maximum speed:1800、1400r/min
适用机型 Applicable to machine:
全部中国生产的悬锭粗纱机
All suspended flyer roving frames made in China.
-
减少粗纱毛羽、纱疵:粗纱通过锭翼空心臂后即缠上压掌臂经压掌导纱孔绕到纱管上,无传统锭翼承受高速气流
[详情]
-
粗纱通道为闭式或开式不锈钢管,精密铸造不锈钢压掌,高效聚氨脂假捻器,锭翼不变形,不磨损,易清洗,使
[详情]
-
闭式悬锭锭翼对温湿度敏感性小、粗纱断头率低、纺纱质量好、适应高速高产、自动化程度高、操作工劳动强度
[详情]
-
飞达锭翼压掌最大限度从用户需求着想:
1.压掌支点转动付全在压掌上,装拆方便,锭翼使用成本低;
[详情]