打印
字号
- 12
- 14
- 16
收藏

特价销售西门子CP 5621通讯处理器6GK1562-1AA00

［深圳市中宇德控自动化工程有限公司］

2012年01月07日　　来源：中国纺机网

<<上一页 [1][2]

XY-360s XY-480s型短袜

广州市星雅机械有限公司XY-360s XY-48[详细]

精品企业

推荐产品

Overview

PCI Express card (PCIe x1) for connection of PCs and SIMATIC PG/PC to PROFIBUS at up to 12 Mbit/s and to the MPI of the SIMATIC S7
Communication services:
- PROFIBUS DP Master Class 1 incl. acyclic DP expansions with SOFTNET-DP software package
- PROFIBUS DP Master Class 2 incl. acyclic DP expansions with SOFTNET-DP software package
- PROFIBUS DP slave with SOFTNET-DP Slave software package
- PG/OP communication with STEP 5 or STEP 7
- S7 communication with SOFTNET-S7 software package
- Open communication (SEND/RECEIVE on basis of the FDL interface) with SOFTNET-DP or SOFTNET-S7 software package
Can be used with:
- STEP 7, STEP 7-Micro/Win, ProTool, ProTool/Pro, SIMATIC PDM (for PG/OP communication)
- COM PROFIBUS
- SOFTNET-S7 (for S7-communication)
- SOFTNET-DP, SOFTNET-DP slave (for DP)
The appropriate OPC server and configuration tools are included in the scope of supply of the respective communication software.

Benefits

Connection for portable PCs (e.g. for diagnostics and commissioning)
Simple installation and commissioning
Optimally coordinated with SOFTNET
OPC as standard interface
Standardized procedure and configuration functionality for NCM PC and STEP 7
Can be used flexibly as PCIe x1 card in PC/IPC with PCI Express x1, x4, x8 or x16 slots

Application

The CP 5621 permits the connection of programming devices (PGs) and PCs to PROFIBUS and to the multipoint interface (MPI) of the SIMATIC S7:

for PGs/PCs with PCI Express slot

Design

Short PCI card
9-pin sub-D socket for connection to PROFIBUS
Operation in the PCI Express x1, x4, x8 or x16 slots is possible

Function

The CP 5621 is operated under various software packages and offers the user the opportunity of performing functions of the programming devices and PCs by means of PROFIBUS and the multipoint interface (MPI).

Only one CP can be used per PG or PC. Likewise, only one protocol (PROFIBUS DP, S7-communication or FDL) can be used per CP.

The following software packs support the CP 5621:

STEP 7 V5.4 SP 4 or higher; Drivers for the CP 5621 are included in the scope of delivery of STEP 7.
SOFTNET-S7 V7.0 or higher; This package enables the S7 programming interface to be used.
SOFTNET-DP V7.0 or higher; This enables the CP 5621 to be used as PROFIBUS DP Master Class 1 or Class 2.
SOFTNET-DP Slave V7.0 or higher; For use of the CP 5621 as PROFIBUS DP slave
STEP 7-Micro/WIN; Hardware basis for the programming software of the SIMATIC S7-200 automation system
ProTool, ProTool/Pro; The CP 5621 can be used as the hardware basis for the configuration tool for all SIMATIC Operator Panels, Touch Panels and Text Displays.
NCM PC; Drivers for the CP 5621 are included in the scope of supply (beginning with SIMATIC NET CD, 2007 Edition).
WinCC/WinCC Flexible; Drivers for the CP 5621 are included in the scope of supply (beginning with SIMATIC NET CD Edition 2007).

Technical specifications

Bestell-Nr.	6GK1 562-1AA00	6GK1 562-1AM00
Product type designation	CP 5621	CP 5621 MPI
Transmission rate
Transmission rate at interface 1 in accordance with PROFIBUS	9.6 Kbit/s … 12 Mbit/s	9.6 Kbit/s … 12 Mbit/s
Interfaces
Number of electrical connections at interface 1 in accordance with PROFIBUS	1	1
Design of electrical connection
at interface 1 in accordance with PROFIBUS	9-pin D-sub socket (RS 485)	9-pin D-sub socket (RS 485)
of backplane bus	PCI Express x1	PCI Express x1
Supply voltage, current consumption, power loss
Type of power supply	DC	DC
Power supply
1 from backplane bus	3.3 V	3.3 V
2 from backplane bus	12 V	12 V
Relative symmetrical tolerance
At 3.3 V with DC	9 %	9 %
At 12 V with DC	8 %	8 %
Current consumed
Max. 1 from backplane bus with DC	0.4 A	0.4 A
Max. 2 from backplane bus with DC	0.18 A	0.18 A
Effective power loss	2.2 W	2.2 W
Permitted ambient conditions
Ambient temperature
During operating phase	5 … 55 °C	5 … 55 °C
During storage	-20 … +60 °C	-20 … +60 °C
During transport	-20 … +60 °C	-20 … +60 °C
Relative humidity at 25 °C without condensation during operating phase, maximum	85 %	85 %
IP degree of protection	IP00	IP00
Design, dimensions and weights
Module format	PCI Express x1	PCI Express x1
Width	18 mm	18 mm
Height	111 mm	111 mm
Depth	129 mm	129 mm
Net weight	100 g	100 g
Product properties, functions, components General
Number of plug-in cards of same design which can be inserted per PC station	1	1
Number of modules - Note	-	-
Performance data
Performance data Open communication
Software required for open communication by means of SEND/RECEIVE	Yes, SOFTNET-DP / SOFTNET-DP slave / SOFTNET-S7	Yes, SOFTNET-DP / SOFTNET-DP slave / SOFTNET-S7
Number of possible connections for open communication by means of SEND/RECEIVE, maximum	50	50
Performance data for PROFIBUS DP master
Software required for DP master function	Yes, SOFTNET-DP	Yes, SOFTNET-DP
Service as DP master
DPV0	Yes	Yes
DPV1	No	No
DPV2	No	No
Number of DP slaves operable on DP master	64	64
Data volume
of address area of inputs as DP master, total	14 640 bytes	14 640 bytes
of address area of outputs as DP master, total	14 640 bytes	14 640 bytes
of address area of inputs per DP slave	244 bytes	244 bytes
of address area of outputs per DP slave	244 bytes	244 bytes
of address area of diagnostics data per DP slave	244 bytes	244 bytes
Performance data for PROFIBUS DP slave
Software required for DP slave function	Yes, SOFTNET-DP slave	Yes, SOFTNET-DP slave
Service as DP slave
DPV0	Yes	Yes
DPV1	No	No
Data volume
of address area of inputs as DP slave, total	122 bytes	122 bytes
of address area of outputs as DP slave, total	122 bytes	122 bytes
Performance data S7 communication
Software required for S7 communication	Yes, SOFTNET-S7	Yes, SOFTNET-S7
Number of possible connections for S7/PG communication, maximum	8	8
Performance data Multiprotocol operation
Number of configurable connections per PC station	207	207
Product functions Management, configuration, programming
Configuration software required	NCM PC included in scope of delivery of required software product	NCM PC included in scope of delivery of required software product
Standards, specifications, approvals
Standard
For EMC	89/336/EEC	89/336/EEC
For CSA and UL safety	CAN/CSA C22.2 & UL 60950-1, UL 508	CAN/CSA C22.2 & UL 60950-1, UL 508
For emitted interference	EN 61000-6-3, EN 61000-6-4	EN 61000-6-3, EN 61000-6-4
For noise immunity	EN 61000-6-1, EN 61000-6-2	EN 61000-6-1, EN 61000-6-2
Certificate of suitability
CE mark	Yes	Yes
C-Tick	Yes	Yes
Accessories
Accessories	Optional: MPI cable	Included in scope of delivery: MPI cable